Applicable for the fluid containing fibers,the high-viscosity fluid containing solid particles,the special fluid control and flow regulating,it can also be used as the isolating valve for its reliable sealing.It is widely employed in chemical industry,paper-making,petroleum,electric power,etc.It has excellent performance.

1. Preeminent performance of adjustment control
The ball is of "V"pattern.At any position from full open to full close,it always keeps the standard geometry.The large adjustable extent is from 100:1 to 200:1,the CV curve of discharge characteristic is similar to the percentage curve,which may realize the precise control of the flow.

2. One piece body
One piece integral body,the strength is high,stress deformation resistance is strong,has no central flange,confinement reliability is improved,has no bending transition at the flow passage,not accumulate,not block,has little influence upon the fluid.

3. eliable seat sealing
The sealing surface build-up welding is handled by hard facing and employ the advanced seat grinding technology and griding ball technology to make V type ball valve have reliable sealing performance which can achieve the V sealing grade of ANSI B16.104 specified.The special requirement can achieve VI grade.

4. Ball
The ball hard surface handled by STL,tungsten,etc.Both the two ends are V pattern,which is easy to precise control for flow also can realize the shearing action for the fluid containing cellulosic,the high-viscosity fluid containing solid particles when shutting.

5. Sealing packing
The stem adopts the adjustable jam type packing of V type PTFE or RPPL.Ensure that has reliable sealing and no outleakage under the middle and high temperture.

6. Drive&Positioner
GAIRUI V TYPE BALL VALVE complement using driver adopts the adjustable manual exerciser,pneumatic driver(with positioner) and adjustable electric driver.

Technical Specification
Size Range: DN 25~250mm   NPS 1”-10”  (Wafer) DN 25~500mm   NPS 1”-20”  (Flange)
Pressure rate: PN 10/16/25/40/63, ANSI 150/300/600
Temp. Range: Metal Seat -29 +450℃, Resilient Seat -29 +150℃
Seal Tightness:  Metal Seat Class IV, Resilient Seat Class VI
Body Material: Carbon Steel, Stainless Steel, Special Alloy
Ball/Stem Material: Stainless Steel, Special Alloy
Seat Material: Stainless Steel+STL, PCTFE,PEEK (Flange), Stainless Steel+STL (Wafer)
Face to Face: ISA S75.04, IEC/DIN 534-3-2 (Flange), Factory Standard (Wafer)
Flange Standard: GB/T 9113.1, JB/T 79.1, HG 20592, ASME B 16.34, ISO 7005 (Other drilling on request)
Appliactions:  Pulp & Paper，Water Treatment，Food & Beverage, Fine Chemical, Power Plant, Steel Industry