Rubber Lined Diaphragm Valve

Rubber Lined Diaphragm Valve

The GAIRUI Electric Actuator Diaphragm Valves is composed of a valve body, a valve cover, a valve stem, a disc, a diaphragm, an electric device and other driving parts.The opening and closing of the valve is driven by the connecting shaft of the electric device to drive the stem nut, so that when the valve rod moves axially, the valve flap can be driven up and down to achieve. When the power supply breaks down and the valve is in urgent need of opening and closing, the hand - electric handoff handle should be first converted to the manual marked position, and the flash door can be opened and closed through the rotating handwheel. When rotating clockwise, the valve can be turned off; otherwise, it will turn on. When the electric operation is resumed, the switch handle must be switched to the position marked with electric mark, so that the electric operation can be carried out.

Rubber Lined Diaphragm Valve

Technical Specification
Normal Size Range: 1/2"-16"
Normal Pressure Rating: PN10~PN16, CLASS150
Operation: Handwheel, Pneumatic, Electric
Temperature Range: -29~150 Degree C

Standards compliance
Design & Manufacture: BS 5156-85, MSS SP-88, GB 12239-89
Face to Face Dimension: BS 5156-85, ANSI B16.10, GB 12221-85, DIN 3202
Flanged Dimension: BS 5156-85, ANSI B16.5, EN 1092, GB/T 17421-98
Inspect & Test: BS 5156, MSS SP-82, GB/T 13927

Component Materials
Body / Bonnet: Cast Iron, Ductile Iron, Cast Steel, Stainless Steel & Duplex
Lining (Optional): 
Fluorine -- PTFE, FEP, PCTFE, PVDF, TFE, PFA, RPP, PO
Rubber  -- NR, BR, IIR, CR, EPDM, CSPE, FKM, SI
Diaphragm: Rubber 
Compressor / Disc: Cast Iron, Ductile Iron, Cast Steel, Stainless Steel
Stem: Carbon Steel & Stainless Steel
Handwheel: Iron & Steel

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.